Saltar al contenido principal

Cambios a Paso #6

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereUse a heat gun to soften the adhesive under the black strip near the upper left corner of the glass display panel.
[* black] Attach a suction cup near the upper left corner of the glass display panel.
[* black] Pull up on the suction cup and use the flat end of a spudger to carefully pry the glass display panel out of the display assembly.
[* icon_note] Once the upper left corner has been separated from the display, it may be helpful to use a guitar pick or another thin plastic object to keep the glass from sticking back down to the display assembly
.
[* black] Insert wisdom hereUse a heat gun to soften the adhesive under the black strip near the upper left corner of the glass display panel.
[* black] Attach a suction cup near the upper left corner of the glass display panel.
[* black] Pull up on the suction cup and use the flat end of a spudger to carefully pry the glass display panel out of the display assembly.
[* icon_note] Once the upper left corner has been separated from the display, it may be helpful to use a guitar pick or another thin plastic object to keep the glass from sticking back down to the display assembly
.