Saltar al contenido principal

Cambios a Paso #4

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use a heat gun to soften the adhesive under the black strip along the right side of the front glass panel.
[* black] Attach a suction cup along the right side of the front glass panel.
[* black] Pull up on the glass panel while you use the flat end of a spudger to separate it from the rest of the display assembly.
[* black] Continue working along the right edge of the front display glass until it is separated from the display.
[* icon_note] It ismay be helpful to use a guitar pick or another thin plastic object to holdkeep the upper right corner of the displayfront glass up offpanel from sticking back down to the display assembly as you work on the left side of the displayassembly.
[* icon_note] It ismay be helpful to use a guitar pick or another thin plastic object to holdkeep the upper right corner of the displayfront glass up offpanel from sticking back down to the display assembly as you work on the left side of the displayassembly.