Saltar al contenido principal

Cambios a Paso #2

Editado por Andrew Bookholt

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] With the panel sufficiently heatedheated, fasten a heavy-duty suction cup near the upper right corner of the display glass.
[* icon_note] To attach the [product|IF145-023|suction cups] we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.
[* icon_caution] Don't fasten the suction cup on top of the rubber strip around the display glass.
[* black] Slowly and gently pull the corner of the display glass up off the display assembly.
[* icon_note] If only the top edge of the glass lifts up (as seen in the third picture), repeat steps one and two until you can lift up the corner of the panel.
[* black] With the panel sufficiently heatedheated, fasten a heavy-duty suction cup near the upper right corner of the display glass.
[* icon_note] To attach the [product|IF145-023|suction cups] we sell, first position the suction cup with the movable handle parallel to the face of the glass panel. While lightly holding the suction cup against the glass, raise the movable handle until it is parallel with the other handle.
[* icon_caution] Don't fasten the suction cup on top of the rubber strip around the display glass.
[* black] Slowly and gently pull the corner of the display glass up off the display assembly.
[* icon_note] If only the top edge of the glass lifts up (as seen in the third picture), repeat steps one and two until you can lift up the corner of the panel.