Saltar al contenido principal

Cambios a Paso #3

Editado por Tm21

Aprobación pendiente

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use iPod opening tool to lift off/flipflip up the black plastic flap where the ribbon connects to the circuit board.
[* black]
Slide out ribbon from circuit board and set circuit board aside. (Board will still be connected to the device via the copper cableribbon and an auxiliary black cable)
[* black] Use iPod opening tool to lift off/flipflip up the black plastic flap where the ribbon connects to the circuit board.
[* black]
Slide out ribbon from circuit board and set circuit board aside. (Board will still be connected to the device via the copper cableribbon and an auxiliary black cable)