Saltar al contenido principal

Cambios a Paso #4

Editado por Ken Gage

Edicion aprobada por Ken Gage

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Use a Phillips #1 screwdriver to remove the five 6-mm screws in the keyboard slot.
[* icon_note] These are not captive panel screws and, once loosened, will be free to move about the assembly.
[* icon_caution] Be careful not to allow either fastenerloosened fasteners into the CPU fan and duct (located in the upper left).
[* icon_caution] Be careful not to allow either fastenerloosened fasteners into the CPU fan and duct (located in the upper left).