Saltar al contenido principal

Cambios a Paso #4

Editado por Inah Embile

Edicion aprobada por Inah Embile

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] UsingUse a Phillips #1 screwdriver,screwdriver to remove the five 6-mm screws in the keyboard slot.
[*

[*
icon_note] These are not captive panel screws andand, once loosenedloosened, will be free to move about the assembly. Care should be take
[* icon_caution] Be careful not
to not allow either fastener into the CPU fan and duct (located in the upper left).
[* red] UsingUse a Phillips #1 screwdriver,screwdriver to remove the five 6-mm screws in the keyboard slot.
[*

[*
icon_note] These are not captive panel screws andand, once loosenedloosened, will be free to move about the assembly. Care should be take
[* icon_caution] Be careful not
to not allow either fastener into the CPU fan and duct (located in the upper left).