Saltar al contenido principal

Cambios al paso #3

Editado por Inah Embile

Edicion aprobada por Inah Embile

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* red] Use a Philips #00 screwdriver to loosen and remove the two 3-mm screws at the top edge of the keyboard.
[* [* icon_note] These are not captive panel screws andand, once loosenedloosened, will be free to move about the assembly. Care should be take
[* icon_caution] Be careful not
to not allow either fastener into the CPU fan and duct (not shown).
[* [* icon_note] These are not captive panel screws andand, once loosenedloosened, will be free to move about the assembly. Care should be take
[* icon_caution] Be careful not
to not allow either fastener into the CPU fan and duct (not shown).