Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #9

Editado por Ken Gage

Edicion aprobada por Ken Gage

Antes
Después
Sin cambios

Líneas de Paso

[* red] Using a Phillips #00 screwdriver, remove the two 3-mm screws from the card connected by a single black wire.
[* icon_note] These are not captive screws and once loosened will be free to move about the assembly. Care should be take to not allow either fastener into the CPU fan and duct (located upper left).