Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #9

Editado por Inah Embile

Edicion aprobada por Inah Embile

Antes
Después
Sin cambios

Líneas de Paso

[* red] UsingUse a Phillips #00 screwdriver,screwdriver to remove the two 3-mm screws from the card connected byto a single black wire.
[* icon_note] These are not captive screws andand, once loosenedloosened, will be free to move about the assembly. Care should be take to
[* icon_caution] Be careful
not to allow either fastener into the CPU fan and duct (located in the upper left).
[* red] UsingUse a Phillips #00 screwdriver,screwdriver to remove the two 3-mm screws from the card connected byto a single black wire.
[* icon_note] These are not captive screws andand, once loosenedloosened, will be free to move about the assembly. Care should be take to
[* icon_caution] Be careful
not to allow either fastener into the CPU fan and duct (located in the upper left).