Cambios al paso #5
Editado por Nikolai Shkurkin —
Edicion aprobada por Nikolai Shkurkin
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Locate the ZIF connector for the power cable located on the rear side of the keyboard. | |
| [* black] Gently pry up the ZIF connector. | |
| [* icon_caution] The ZIF connector is glued down. Be gentle, as ripping off or breaking this will make your phone inoperable. | |
| - | [* icon_reminder] When the ZIF connector pried up it will no longer lock properly. You will need to apply adhesive to ensure your power cable stays in place. |
| - | [* black] With your thumb, slowly pull down and disconnect the power cable from the phone. The cable should disconnect with minimal resistance. |
| + | [* icon_reminder] When the ZIF connector pried open it will no longer lock properly. You will need to apply adhesive to ensure your power cable stays in place when you reassemble your phone |
| [* black] GROUP EDIT: we need to get a close up of this and say something about how its a ZIF cable that needs to be unclasped, and maybe something about adhesive. |