Saltar al contenido principal

Cambios al paso #4

Editado por Jeff G

Edicion aprobada por Jake Devincenzi

Antes
Después
Sin cambios

Líneas de Paso

[* black] Carefully pull the hard drive data cable straight up from its socket on the logic board.
-[* icon_reminder] During reassembly, make sure the hard drive data cable is firmly seated in its socket on the logic board. Otherwise, during boot-up you will see a flashing question mark "?".
+[* icon_reminder] During reassembly, make sure the hard drive data cable is firmly seated in its socket on the logic board; otherwise, during boot-up you will see a flashing question mark "?".