Saltar al contenido principal

Cambios al paso #4

Editado por Walter Galan

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* red] You will see the hard drive attached to the metal plate. Unplug the ATA/IDE cable from the logic board to completely separate the metal plate from the logic board.
-[* icon_reminder] Don't forget to reconnect the cable before closing the unit back up, or you will see a flashing ? mark on your TV when you power it up.
+[* black] Carefully pull the hard drive data cable straight up from its socket on the logic board.
+[* icon_reminder] During reassembly, make sure the hard drive data cable is firmly seated in its socket on the logic board. Otherwise, during boot-up you will see a flashing question mark "?".