Saltar al contenido principal

Cambios al paso #4

Editado por bushing

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

-[* black] You'll see the hard drive attached to the metal plate. Unplug the ATA/IDE cable from the logic board to completely separate the metal plate.
+[* red] You will see the hard drive attached to the metal plate. Unplug the ATA/IDE cable from the logic board to completely separate the metal plate from the logic board.
+[* icon_reminder] Don't forget to reconnect the cable before closing the unit back up, or you will see a flashing ? mark on your TV when you power it up.

Imagen 2

Versión Antigua

Nueva Versión