Saltar al contenido principal

Cambios al paso #3

Editado por South30

Edicion aprobada por Andrew Optimus Goldheart

Antes
Después
Sin cambios

Líneas de Paso

-[* red] There will be a keyboard cable beneath the keyboard. Remove this cable by pushing in the black locking clips and pulling the cable away from the connector base.
-[* black] Remove the keyboard.
+[* red] The Ribbon Cable must be disconnected here to release the keyboard.
+[* blue] Using a plastic splunger or the tip of your screwdriver gently push upward on the two black tabs securing the connection.
+[* blue] When the black plastic bar running across the cable is unseated you can slowly and carefully pull the ribbon cable free.
+[* black] You can now lift and remove the keyboard.

Imagen 1

Versión Antigua

Nueva Versión