Saltar al contenido principal

Cambios al paso #2

Editado por Laith Williams

Edicion aprobada por Laith Williams

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Use the Phillips #0 screwdriver to remove the 9mm screw in the bottom left corner of the RAM tray covering.
-[* black] Remove the RAM tray cover by prying up with a spudger.
+[* red] Use a Phillips #0 screwdriver, remove the 9mm screw located in the bottom left corner of the RAM tray cover.
+[* black] Using a spudger, remove the RAM tray cover.