Saltar al contenido principal

Cambios al paso #3

Editado por Phryne

Edicion aprobada por Phryne

Antes
Después
Sin cambios

Líneas de Paso

+[* black] Let’s move on to the motherboard. Clean the motherboard with PCB Cleaner. Then run diode mode measurement of the earpiece speaker and sensor connector and the dot projector connector. The measured value is normal.
+[* black] Continue measuring the infrared camera connector. Judging by the measured value, Pin 8 relevant circuit has open-circuited. Normal value should be 260 or so.