Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #1

Editado por Josh

Edicion aprobada por Josh

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove button headOn the right side of the board, there is a screw holding transistor tothat goes through a transistor, that secures the control board to the radio. Remove this screw, and set aside.
[* black] Remove Machinethe screw holdingon the left that holds the board to the radioradio. Set it aside.
[* black] The two screws that are removed during this step are not the same. Note which screw comes from which side. The screw with the tapered head goes on the left. The screw with a flat mounting surface goes on the right.
[* black] Remove button headOn the right side of the board, there is a screw holding transistor tothat goes through a transistor, that secures the control board to the radio. Remove this screw, and set aside.
[* black] Remove Machinethe screw holdingon the left that holds the board to the radioradio. Set it aside.
[* black] The two screws that are removed during this step are not the same. Note which screw comes from which side. The screw with the tapered head goes on the left. The screw with a flat mounting surface goes on the right.