Saltar al contenido principal

Cambios al paso #1

Editado por Walter Galan

Edicion aprobada por Walter Galan

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use the flat end of a spudger to pry the right side of the I/O board data cable connector up off its socket on the I/O board.
[* icon_caution] When prying the I/O board data cable connector from its socket, make sure to pry the connector itself and not'''not''' the socket. Prying the socket may cause irreversible damage to the I/O board.
[* icon_caution] When prying the I/O board data cable connector from its socket, make sure to pry the connector itself and not'''not''' the socket. Prying the socket may cause irreversible damage to the I/O board.