Saltar al contenido principal

Cambios al paso #4

Editado por Kristen Gismondi

Edicion aprobada por Kristen Gismondi

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Using a flat-head screw driver straighten up all three latches of metal cover.
+[* red] Using a spudger, straighten all three metal latches.
[* black] Hold both edges of the metal cover with your finger and pull upward to take it out from its position.
[* icon_caution] Metal cover edges are very sharp. Watch your finger when holding the metal cover.