Saltar al contenido principal

Cambios al paso #9

Editado por Jake Devincenzi

Edicion aprobada por Jake Devincenzi

Antes
Después
Sin cambios

Líneas de Paso

[* black] Removing the ribbon cable from the main assembly gives us a closer look at the buttons and Bluetooth antenna on one side, and the backlight LEDs on the reverse.
[* black] Since the cable houses all 4 buttons, 3 LEDs, and the Bluetooth 2.1 antenna, replacing an individual component will be impossible (even if you can somehow get inside without compromising the display glass).