Saltar al contenido principal

Cambios al paso #1

Editado por Ji Kim

Edicion aprobada por Ji Kim

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Remove the four M2x.4 x 6mm screws.
-[* black] Carefully fold the top half of the laptop over so that the back cover is shown.
-[* black] Remove the back cover by pulling up on the tabs near the handle and pulling the entire cover down away from the antennas.
+[* red] Remove the four M2x 6mm screws.
+[* black] Carefully, rotate the top half of the laptop so that the back cover is shown.
+[* black] Lift up the lower part of the cover and gently pull it down away from the antennas.