Cambios al paso #1
Editado por Ben Malone —
Edicion aprobada por Ben Malone
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] With all the screws removed from the motherboard, gently pull the board out of slot |
|---|---|
| + | [* red] With all the screws removed from the motherboard, gently pull the board out of slot using a J00 Screwdriver |
| [* orange] Be cautious not to break the USB and 3.5mm auxiliary ports which are poking through the side of the device. | |
| [* icon_note] The Microphone wires that connect to the back of the motherboard are very thin and may pull out. Do not worry, the following step is removing those wires. |