Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #12

Editado por Andrew Optimus Goldheart

Edicion aprobada por Andrew Optimus Goldheart

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Remove the following screws securing the logic board and MagSafe DC-In board to the upper case:
[* black] Remove the following screws securing the logic board and MagSafe DC-In board to the upper case:
[* red] Eight 3.3 mm T5 Torx screws
[* orange] One Phillips #00 screw
[* yellow] Two 3.1 mm T5 Torx screws
[* black] Remove two more screws, from the MagSafe DC-In board in the upper right corner (second image).
[* green] Two 3.4 mm T5 Torx screws