Saltar al contenido principal

Fix Your Stuff

Right to Repair

Parts & Tools

Cambios al paso #9

Editado por Walter Galan

Edicion aprobada por Walter Galan

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Insert wisdom hereGently push the edges of the display data cable connector away from its socket on the logic board.
[* icon_note] It is recommended "walk" the connector out of its socket. Simply push the top and bottom corners of the connector and carefully "walk it out" of its socket.
[* black] Pull, but do not remove, the display data cable connector out of its socket and carefully move it out of the way
.
[* black] Insert wisdom hereGently push the edges of the display data cable connector away from its socket on the logic board.
[* icon_note] It is recommended "walk" the connector out of its socket. Simply push the top and bottom corners of the connector and carefully "walk it out" of its socket.
[* black] Pull, but do not remove, the display data cable connector out of its socket and carefully move it out of the way
.

Imagen 1

Versión Antigua

Nueva Versión