Saltar al contenido principal

Repara tus cosas

Derecho a Reparar

Partes y Herramientas

Cambios al paso #1

Editado por Walter Galan

Edicion aprobada por Walter Galan

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Use the tip of a spudger to disconnect the "insert name here"push the edges of the I/O board connector straight out of its socket on the logic board.
[* icon_note] It is recommended "walk" the connector out of its socket. Simplyto carefully push the top and bottom cornerson both sides of the connector and carefully "walkto "walk" it out"out of its socket.
[* black] Use the tip of a spudger to disconnect the "insert name here"push the edges of the I/O board connector straight out of its socket on the logic board.
[* icon_note] It is recommended "walk" the connector out of its socket. Simplyto carefully push the top and bottom cornerson both sides of the connector and carefully "walkto "walk" it out"out of its socket.