Cambios al paso #1
Editado por Nissan Uddin —
Edicion aprobada por Nissan Uddin
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* icon_note] Power off your XPS 15 before beginning the disassembly. | |
| [* red] Remove the 10 T5 Torx screws located on the outer perimeter of the device. | |
| [* orange] Use the 1.5 mm Phillips screwdriver to remove the screws under the flip up plate. | |
| + | [* black] Remove the rear panel using a plastic spudger. Its easiest to start from the top and work your way to the bottom. |