Skip to main content

Changes to Step #1

Editado por Cynthia Replogle

Edicion aprobada por Cynthia Replogle

Borrada
Añadida
Sin cambios

Step Lines

[* icon_note] With the case and battery removed from the midframe, begin removing all cables attached to the motherboard.
[* icon_note] Place the device so the midframe's backside faces up. Start with the cable on the bottom left corner.
[* black] Use a spudger to lift up the white locking cable tensioner and slide the flex cable out.
[* black] Proceed counterclockwise to the next cable and repeat. Small flex cable on the bottom won't need cable tensioner lifted, just carefully pull out.
[* black] Proceed counterclockwise to the next cable and repeat. Small flex cable on the bottom won't need cable tensioner lifted, just carefully pull out.