Skip to main content

Changes to Step #1

Editado por Walter Galan

Edicion aprobada por Walter Galan

Borrada
Añadida
Sin cambios

Step Lines

[* icon_note] With the case and battery removed from the midframe, begin removing all cables attached intoto the motherboard.
[* icon_note] With the case and battery removed from the midframe, begin removing all cables attached intoto the motherboard.
[* icon_note] Place the device so the midframe's backside faces up. Start with the cable on the bottom left corner.
[* black] Use a spudger to lift up the white locking cable tensioner and slide the flex cable out.
[* black] Proceed counterclockwise to the next cable and repeat.