Saltar al contenido principal

Cambios al paso #1

Editado por Kyle Kern

Edicion aprobada por Kyle Kern

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] With the case and battery removed from the Mid-BoardMid-Board, begin removing all cables plugged into Mid-Board.
[* icon_note] ThePlace the device such that the backside of the Mid-Board facingfaces up. Start with the Cable on the bottom left corner.
[* black] Use a flat pry tool to lift up the white locking cable tensioner and slide flex cable out.
[* black] Proceed counterclockwise to the next closest small cable and repeat.
[* icon_note] With the case and battery removed from the Mid-BoardMid-Board, begin removing all cables plugged into Mid-Board.
[* icon_note] ThePlace the device such that the backside of the Mid-Board facingfaces up. Start with the Cable on the bottom left corner.
[* black] Use a flat pry tool to lift up the white locking cable tensioner and slide flex cable out.
[* black] Proceed counterclockwise to the next closest small cable and repeat.