Saltar al contenido principal

Changes to Step #1

Editado por Isabelle Burgess

Edicion aprobada por Isabelle Burgess

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* icon_note] With the case and battery removed from the mid frame, begin removing all cables plugged into mid board.
[* icon_note] Place the device such that the backside of the mid frame faces up. Start with the Cablecable on the bottom left corner.
[* icon_note] Place the device such that the backside of the mid frame faces up. Start with the Cablecable on the bottom left corner.
[* black] Use a flat pry tool to lift up the white locking cable tensioner and slide flex cable out.
[* black] Proceed counterclockwise to the next cable and repeat.

Imagen 3

Versión Antigua

Nueva Versión