Cambios al paso #1
Editado por Kristen Gismondi —
Edicion aprobada por Kristen Gismondi
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Pry slightly open one corner of the device by using your finger nail to separate the screen from the back case. |
|---|---|
| - | [* orange] Use one of the plastic pry tools from the Repair Kit, carefully detach the back case from the tablet. Start by inserting the tool where your fingernail opened a gap, and work around all 4 sides of the device. There should be a slight click noise as you free each tab. |
| - | [* yellow] Once The case is completely free, carefully lift it and place it face up on the workstation, being cautious not to damage the speaker wires connecting the two halves. |
| + | [* black] Slightly pry open one corner of the device by using your finger nail to separate the screen from the back case. |
| + | [* black] Use an opening tool to carefully detach the back case from the tablet. Start by inserting the tool where your fingernail opened a gap, and work around all four sides of the device. |
| + | [* icon_note] There will be a slight click noise as you free each tab. |
| + | [* black] Once the case is completely free, carefully lift it and place it face up on the workstation, being cautious not to damage the speaker wires connecting the two halves. |