Cambios al paso #4
Editado por Christine Ha —
Edicion aprobada por Christine Ha
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] After removing metal panel, use the spudger to detach the the 3 ribbon wires attached to the motherboard. Now, remove the silver 3.2 mm Phillips #000 screws holding the motherboard in place. Lastly, lift the board from the top of the camera and pull board upwards, pulling out the AV port with it. |
|---|---|
| + | [* red] Remove the metal panel from the body and use the spudger to detach the three ribbon wires attached to the motherboard. Remove the two silver 3.2mm screws securing the motherboard. Lift and remove the motherboard from the camera body. |
| + | [* icon_note] The AV port will be attached to the motherboard. |