Saltar al contenido principal

Cambios a este Paso

Editado por John Egan

Edicion aprobada por John Egan

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Use the Phillips #00 screwdriver to remove the two 1mm screw holding in the network card
-[* black] Using the screwdriver once again, remove the metal piece holding in the network card
-[* black] Disconnect the 2 cable connectors from the network card. If the cables are stuck, gently wiggle them until they disconnect
+[* black] Use the Phillips #00 screwdriver to remove the two 1mm screw holding in the network card.
+[* black] Using the screwdriver once again, remove the metal piece holding in the network card.
+[* black] Disconnect the 2 cable connectors from the network card. If the cables are stuck, gently wiggle them until they disconnect.