Saltar al contenido principal

Cambios a este Paso

Editado por Kameron Jusseaume

Edicion aprobada por Kameron Jusseaume

Antes
Después
Sin cambios

Líneas de Paso

-[* black] Remove the 2mm screws on the side of the battery.
+[* black] Use the Phillips #00 screwdriver to remove the 1mm screw holding in the network card
+[* black] Disconnect the network card from the motherboard socket
+[* black] Disconnect the 2 cable connectors from the network card. If the cables are stuck, gently wiggle them until they disconnect