Cambios al paso #1
Editado por Jared Boisclair —
Edicion aprobada por Jared Boisclair
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] To remove the glue, heat is required. We suggest using the iOpener on the other side of the case. |
|---|---|
| - | [* icon_caution] Another option could be to use a blowdryer on light heat. Constantly moving the dryer should prevent any buildup of heat. |
| + | [* red] Free the battery from the back of the LCD Display it is attached to. This can be done manually by working a pry tool under each side of the battery to loosen the glue and lifting up on the battery. |
| + | [* orange] The adhesive may be too strong to manually remove, so heat can be applied using the iOpener tool. This evenly heats the adhesive and allows the battery to be lifted away easier. |
| + | [* icon_caution] If then iOpener device is unavailable to you, you may use a blow-dryer on a cool setting. Keep the dryer moving and at least 6 inches from the battery to prevent dangerous bubbling of the battery due to excess heat. |