Cambios al paso #6
Editado por Austin Blakely —
Edicion aprobada por Austin Blakely
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] To remove fan, unclip cable. |
|---|---|
| - | [* orange] Lift tape holding down cables over fan. |
| - | [* yellow] Undo two 5mm Phillips #1 screws (top left screw is covered by the cables, use Spudger to get out of the way) |
| - | [* black] Lift fan out of its slot. |
| + | [* red] Unplug the cable connecting the fan to the motherboard. |
| + | [* orange] Lift the tape holding down the cables over the fan. |
| + | [* yellow] Undo two 5mm Phillips #1 screws. |
| + | [* icon_note] The top left screw is covered by the cables. Use a spudger to get it out of the way. |
| + | [* black] Lift the fan out of its slot. |