Saltar al contenido principal

Cambios a Paso #1

Editado por Walter Galan

Edicion aprobada por Walter Galan

Eliminado
Añadido
Sin cambios

Líneas de Paso

[* black] Front panel assembly remains.
[* icon_note] If you are replacing
Peel the antenna cable up from its channel in the front panel assembly with a new one, be aware you may need to transfer some parts fromassembly.
[* icon_caution] Do '''not''' completely remove
the old partantenna cable, it is still connected to the new part. This may include these parts
[* red] Vibrator
[* orange] Antenna
[* yellow] Front Camera, Earpiece and Sensor
[* green] Microphone Gasket
[* violet] Buttons
antenna board.
[* black] Front panel assembly remains.
[* icon_note] If you are replacing
Peel the antenna cable up from its channel in the front panel assembly with a new one, be aware you may need to transfer some parts fromassembly.
[* icon_caution] Do '''not''' completely remove
the old partantenna cable, it is still connected to the new part. This may include these parts
[* red] Vibrator
[* orange] Antenna
[* yellow] Front Camera, Earpiece and Sensor
[* green] Microphone Gasket
[* violet] Buttons
antenna board.

Imagen 1

Versión Antigua

Nueva Versión

Imagen 2

Eliminado