Cambios al paso #1
Editado por Justin Ogihara —
Edicion aprobada por Justin Ogihara
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* red] Use a T5 Torx screwdriver to unscrew the ten 3mm screws on the laptop back cover and then remove the cover. iFixit’s magnetic white board is great for keeping the screws in one place. |
|---|---|
| - | [* black] If the base cover is stuck, use prying tool to lever it off. |
| + | [* red] Use a T5 Torx screwdriver to unscrew the ten 3mm screws on the laptop back cover and then remove the cover. |
| + | [* icon_note] iFixit’s magnetic project mat is great for keeping the screws in one place. |
| + | [* black] If the back cover is hard to remove, use a plastic opening tool to remove the back cover. |