Cambios al paso #3
Editado por Michael Papadopolous —
Edicion aprobada por Michael Papadopolous
- Antes
- Después
- Sin cambios
Líneas de Paso
| [* black] Then wedge the plastic tool in between the edge of the heat sink and the aluminium perimeter. | |
| [* black] Gently pry up on the heat sink until it is lose enough for you to remove. Then grab and remove the heat sink. | |
| + | [* icon_caution] If it does not work in the first position that you tried, try another. Do not pry too much in one position because it could damage the components of the heat sink. |