Saltar al contenido principal

Cambios al paso #1

Editado por Austin Blakely

Edicion aprobada por Austin Blakely

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Wedge the plastic opening tool in between the aluminum and the backboard
+[* red] Wedge the plastic opening pick in between the aluminum cover and the motherboard.
[* black] Gently pull up popping off the cover and revealing the rest of the heat sink.
+[* icon_reminder] The aluminum cover will slot into small clamps on all sides, so be sure to align all sides within the clamps during reinstallation.