Repara tus cosas Comunidad Tienda

Cambios al paso #1

Editado por Austin Blakely —

Edicion aprobada por Austin Blakely

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Use the plastic opening tool to pop up the small black tab seen in the picture on your left.
-[* icon_note] The black tab will not pop out it will only release the ribbon from its compartment.
-[* black] Use the tweezers to remove the orange ribbon from is compartment and unstuck the ribbon from the backboard.
+[* red] Use a plastic opening pick to pop up the small black tab of the ZIF connector.
+[* icon_note] The black tab should not pop out, but rather hinge upwards. It will release the ribbon cable from its connector.
+[* black] Use the tweezers to remove the orange ribbon cable from the connector and peel the ribbon from the backboard, as it's secured with a light adhesive.