Saltar al contenido principal

Cambios al paso #2

Editado por Robert B

Edicion aprobada por Robert B

Antes
Después
Sin cambios

Líneas de Paso

-[* red] Pull back panel off by pulling at the tab. This should give you enough leverage to pull the panel off smoothly.
-[* icon_caution] If it is difficult to remove and feels like it is going to break, DO NOT force it. Check to see if all the screws are removed before attempting again.
+[* red] Pull the back panel off using the highlighted tab. The tab should give you enough leverage to pull the panel off smoothly.
+[* icon_caution] If the back panel is difficult to remove and feels like it is going to break, DO NOT force it. Check to confirm that all the screws are removed before attempting again.