Saltar al contenido principal

Cambios al paso #1

Editado por iRobot

Edicion aprobada por iRobot

Antes
Después
Sin cambios

Líneas de Paso

[* red] Remove the 4mm #00 Philips screw located on the top left corner beneath the front panel.
[* orange] Remove the 5mm #00 Philips screw located on the top left corner beneath the front panel.
[* yellow] Remove the 5mm #00 Philips screw located on the top of the left side panel near the microphone connection.
[* green] Remove the 4mm #00 Philips screw located on the bottom left corner beneath the front panel.
-[* light_blue] Using a black spudger, unclip the orange wire ribbon on the lower left corner of the motherboard and then remove it using the nylon tipped tweezers.
+[* light_blue] Using a black spudger, unclip the orange wire ribbon on the lower left corner of the motherboard and then remove it using the nylon tipped [product|IF145-020|tweezers].
[* black] The side panel is now free and can be removed by pulling the panel to the left.