Saltar al contenido principal

Cambios al paso #1

Editado por Tanmayi Ambati

Edicion aprobada por Tanmayi Ambati

Antes
Después
Sin cambios

Líneas de Paso

-[* red] remove the four 2mm #00 Phillips head screws from the metal back plate.
-[* orange] remove the 4mm #00 Phillips head screw from the top corner of the metal back plate.
+[* red] Remove the four 2mm #00 Phillips head screws from the metal back plate.
+[* orange] Remove the 4mm #00 Phillips head screw from the top corner of the metal back plate.