Cambios al paso #5
Editado por Dominik Schnabelrauch —
Edicion aprobada por Dominik Schnabelrauch
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* icon_note] [guide|25705|Apply more heat] if the adhesive becomes hard to cut. During the removal process, the back cover is under tension all the time and is likely to break if the adhesive isn't softened enough. |
|---|---|
| [* black] Insert a fourth opening pick at the top left corner of the rear glass. | |
| [* black] Slide the opening along the top edge of the rear glass and cut the remaining adhesive with it. |