Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Tienda

Cambios al paso #9

Editado por Luke Soules

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Getting to the optical drive takes a bit more work...
[* black] First remove the screws securing the vent plate near the hingesThe rear vent is held in place by both Phillips #00 and remove it from the upper caseT7 Torx screws. We haven't seen Apple use any T7 screws lately, so this is an interesting screw choice.
[* black] First remove the screws securing the vent plate near the hingesThe rear vent is held in place by both Phillips #00 and remove it from the upper caseT7 Torx screws. We haven't seen Apple use any T7 screws lately, so this is an interesting screw choice.
[* black] The cast aluminum vent plate is painted with a satin white rubberized paint, and probably adds a good amount of rigidity to the device.

Imagen 1

Versión Antigua

Nueva Versión