Cambios al paso #2
Editado por Marty Rippens —
Edicion aprobada por Marty Rippens
- Antes
- Después
- Sin cambios
Líneas de Paso
| - | [* black] To start, use the PH0 screwdriver to unscrew the two 5mm screws on the panel. |
|---|---|
| - | [* black] To do this, twist the screws left until they are completely loose. |
| + | [* black] Using a Phillips #0 screwdriver, to unscrew the two 5mm captive screws attached to the access panel. |
| [* icon_note] The screws will not come out all the way, once they are loose enough you should be able to open the panel. |