Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #1

Editado por Emily Stephens

Edicion aprobada por Emily Stephens

Antes
Después
Sin cambios

Líneas de Paso

[* black] First, remove theRemove the plastic screw cover located on the bottom of the device. Insert a small flat-headflat-headed screwdriver into one side of the screw cover and gently ease it out. Do the same toRepeat on the other side until it's worked freeside.
[* icon_cautionicon_note] Be very gentle when removing the screw cover as it is a brittle piece of plastic thatand will break if forced.
[* red] Usingicon_reminder] You will need a #00 Phillips screwdriver,screwdriver to remove the two 2.6 mm screws that are now exposed.
[* black] First, remove theRemove the plastic screw cover located on the bottom of the device. Insert a small flat-headflat-headed screwdriver into one side of the screw cover and gently ease it out. Do the same toRepeat on the other side until it's worked freeside.
[* icon_cautionicon_note] Be very gentle when removing the screw cover as it is a brittle piece of plastic thatand will break if forced.
[* red] Usingicon_reminder] You will need a #00 Phillips screwdriver,screwdriver to remove the two 2.6 mm screws that are now exposed.