Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #1

Editado por Christopher Wright

Edicion aprobada por Christopher Wright

Antes
Después
Sin cambios

Líneas de Paso

[* black] First, begin by removing the screw cover that is located on the bottom of the device. You will need to stickinsert a small flat-head screwdriver into one side of the screw cover and gently ease it out. Do the same to the other side until it's worked free.
[* icon_caution] Be very gentle when removing the screw cover as it'sit is a brittle piece of plastic that will break if forced.
[* red] Using a small#00 Phillips screwdriver, remove the two 2.6 mm screws that are now exposed.
[* black] First, begin by removing the screw cover that is located on the bottom of the device. You will need to stickinsert a small flat-head screwdriver into one side of the screw cover and gently ease it out. Do the same to the other side until it's worked free.
[* icon_caution] Be very gentle when removing the screw cover as it'sit is a brittle piece of plastic that will break if forced.
[* red] Using a small#00 Phillips screwdriver, remove the two 2.6 mm screws that are now exposed.