Saltar al contenido principal

Repara tus cosas

Derecho a reparar

Partes y herramientas

Cambios al paso #1

Editado por Andrew Optimus Goldheart

Aprobación pendiente

Antes
Después
Sin cambios

Líneas de Paso

[* black] Remove the screw cover located on the bottom of the zune.
[* black] Stick a small flat head screw driver in one side of dock screw cover and gently ease upit out. Do the same on the other side until it's worked free.
[* black] Stick a small flat head screw driver in one side of dock screw cover and gently ease upit out. Do the same on the other side until it's worked free.
[* icon_caution] Warning: This is a brittle piece of plastic that will break if forced.
[* red] There should be two screws of size 2.6 mm on the bottom of the Zune.